RealTrac Collision Awareness System

RealTrac Collision Awareness System (CAS)


The RealTrac Collision Awareness System product is designed in order to provide: dangerous proximity detection; issuing warning to the objects detected in such proximity; collision awareness between vehicles or between vehicles and personnel.

The product has two monitor directions:

  1. Vehicle-vehicle proximity detection control
  2. Vehicle-personnel proximity detection control


“Collision Awareness Systems from RealTrac are in accordance with the upcoming ISO Standard 21815 and RealTrac is proud to actively participate in the respective ISO standards groups. This provides our customers a unique combination of cutting-edge technology with global standardization”

Dr. Peter Stegmaier, Board Member of RealTrac


Monitor directions

Vehicle-vehicle (V2V)

  • Registers dangerous proximity 
  • Issues a warning about a potential collision
  • Decreases downtimes caused by vehicle collisions
  • Ensures traffic safety in case of poor visibility

Vehicle-personnel (V2P)

  • Detects a person on a vehicle’s path of motion
  • Issues a warning about a person located in hazardous area
  • Decreases industrial injuries caused by collisions between vehicles and personnel


Dangerous proximity control zones

After RealTrac Collision Awareness System (CAS) equipment is installed on a vehicle or machinery ­ -  3 control zones are shaped around it.


The RealTrac Collision awareness – Attention Zone

Attention Zone

Issues a warning to personnel about vehicles, equipment, etc. detected in close range.

Detects potential dangerous proximity and draws personnel’s attention to proximity to the other object.

  • Light indication
    • Dashboard indication in a vehicle
    • LED signal on a personal tag
  • Sound indication
    • Repeating audio signal inside the cab
  • Vibration
    • Discrete vibration on a tag

The RealTrac Collision awareness – Danger Zone

Danger Zone

Provides dangerous proximity detection and attracts personnel’s attention, can slow down the speed of vehicles or equipment.

Issues warnings about possible accidents and draws personnel’s attention to a dangerous proximity to the other object.

  • Light indication
    • Dashboard indication in a vehicle
    • LED signal on a personal tag
    • Strobe light on the outside of a vehicle
    • Blinking yellow marker lights on a vehicle
  • Sound indication
    • Frequently repeating audio signal inside a vehicle
  • Vibration
    • Repeating vibration on a tag

The RealTrac Collision Awareness – Emergency Zone

Emergency Zone

Generates alarm signal in case of emergency or extreme dangerous proximity, can stop vehicles or equipment.

  • Light indication
    • Emergency strobe lights on a vehicle
    • LED light on a personal tag
  • Sound indication
    • Car siren
    • Car horn
  • Vibration
    • Continuous vibration on a personal tag

It helps to create three necessary zones around a vehicle or any other piece of equipment that will issue a warning about dangerous proximity between vehicles and personnel.


Control Zones side view

The RealTrac Collisiion Awareness (CAS) – Zones side view

The zones can be configured to detect other objects at various distances from a vehicle or machinery.

Control Zones top view

The RealTrac Collision Awareness (CAS) – Zones top view



The zones can have different shapes and be tailored to certain type of vehicles and the equipment installed.


The Key Feature of RealTrac Collision Awareness (CAS)


The 3 zone vehicle operator display for continuous visual assessment of the environment. This way it enables to detect any case of dangerous proximity with another object and take actions to prevent a collision or run over.

The display shows the system health and the buttons enable sending emergency notifications or confirming any action.

On the right you can see how an object enters and leaves different control zones 


«Alert» zone

PROD CAS 1000 VOD «Alert» zone

The other object is to the right of the vehicle along the path in «Alert» Zone.

«Danger» zone

PROD CAS 1000 VOD «Danger» zone

The object has approached the vehicle at a dangerous proximity and entered «Danger» zone. The sound notification is activated and the sign «Alert» on the display starts to blink rarely.

«Emergency» zone

PROD CAS 1000 VOD «Emergency» zone

The object has come close to the vehicle at a dangerous distance, has entered the «Emergency» zone and a collision is possible. A permanent audible alarm is activated and the «Emergency» sign flashes frequently on the display.


Additionally, RealTrac Collision awareness System can be connected to the cap lamps, flashing beacons and equipment for sound notification. This way the system will notify the machinery and personnel about entering «Alert», «Danger» and «Emergency» zones.


Advantages of the product


Advantages of the RealTrac Collision awareness – Ingress Protection IP67

Operates in any weather conditions and aggressive environments

The product design is based on the equipment enhanced with IP65-67, that ensures its use in any weather conditions, aggressive labor environments with much dust and within wide operating temperature range.

No Internet or server connection is required

No Internet or server connection is required

The product detects dangerous proximity and issues warnings independently from server or Internet connection. It ensures its use in any conditions.


Possible applications of the RealTrac Collision awareness System




The RealTrac Collision awareness System Components


Personnel equipment


PROD TAG 410

PROD TAG 410

Personal tag PROD TAG 410 is a mobile equipment enabling to detect positioning of personnel regarding a vehicle with installed VBUs of the RealTrac Collision Awareness system. The tag can be embedded into cap lamp or utilized as a portable equipment.

PROD TAG 210



PROD TAG 210




Personal tag PROD TAG 210 is a mobile equipment enabling to detect positioning of personnel regarding a vehicle with installed VBUs of the RealTrac Collision Awareness system.


Equipment for vehicles


PROD VCD 030

PROD CAS 1600 (PROD VCU 030)

The control unit is installed on the vehicle and calculates the distance from the tag to the antennas and the direction of movement of the tag. It determines in which of the control zones the tag is located and, depending on this, displays information about objects in different zones on the driver's display and activates light-graphic or audible warning signals.

PROD VBU 030


PROD CAS 1600 (PROD VBU 030)

Antenna - installed in quantities of 4-8 depending on the size and configuration of the vehicle and is used to detect other antennas or personal tags (trackers).




Order the presentation of The RealTrac Collision awareness System







 

* - required fields



 




Address:

RealTrac International

Via Cetta 8
Ponte Capriasca, CH-6946, Switzerland
Phone: +41 (91) 228-05-29

RealTrac Europe

Novi Sad, Serbia

We are in social networks:

RealTrac International in LinkedIn RealTrac International in Google+ RealTrac International in Youtube RealTrac International in Instagram

Selected country: Zambia
RealTrac Technologies

© RealTrac International 2007 - 2024. All rights reserved.